Burdizzo Castrator , Hoof Claw Cutter , Tooth Cutter, Vaccination Syringe , Postmortem Set, Veterinary Instruments, Dental Instruments , All Kind of Surgical Instruments , Jewelery Tools , Watch Tools ,Tweezers

Laboratory Steel Furniture

Type of Lab furniture Side bench without rack with table top,Side bench with rack and table top,Island bench with table top,Side sink with table top
Type of Frame for installation of bench C type frame
Type of laboratories furniture and allied accessories Modular
Cabinet design Facilitating future equipment retrofits and full reconfigurations without requiring any major modification to the structure
Ground clearance ± 5 mm 50 mm
Table back bottom skirting N.A
Rear panel Fixed
Provision of Electrical raceway Yes
Provision of Electrical points Yes
Provision of modular type reagent rack N.A
Provision of Electrical service panels Slideable type
Provision of Gas service panels N.A
Provision of Verticals Single
Verticals (single) 1 number
Verticals (double) N.A
Mini Vertical Service channel connector N.A
Provision of blower (to remove airborne contaminants) No
Provision of ducting (for purpose of ventilation) No
Scope of supply (offer price to include all cost components) Furnishing/Installation all the laboratories furnitures and allied accessories along with the supporting structures
Transportation /freight charges Offer prices are on free delivery at consignee site
Approval of laboratory layout plan After award of contract, seller shall have to get submitted layout plan within 10 days to get approved from buyer. Buyer shall convey his approval or otherwise within 10 days after submission of layout plan. If there is delay in approval of plan from buyer side, the D.P shall be regularized for the period of delay in plan approval
MATERIAL
Type of Frame C type Frame - One piece Deep Drawn moulded in EDD CRCA Ç’ frame work with 50 mm width x 50 mm height and epoxy powder coated with self adjusting levellers (No tubular construction) – 2 numbers per table
Each moulded C frame leg have a load carrying capacity 600 Kgs.
Material of Frame Galvanized (Zinc coated) GI steel sheet double skin pass
Thickness of Frame 1.1 mm
Cabinets body (casing) material GI steel sheets
Thickness of Cabinet frame cover panel 1.2 mm
Base Cabinets UDL (uniformly distributed load) 300 Kgs
Drawers support brackets shelves slides thickness 1.1 mm
Side cover panels material 1.1 mm
Side cover panels thickness 1.1 mm
Handles thickness 1.2 mm
Sandwich type metal shutters (within filled sound deadening material) made up of GI steel sheets epoxy powder coated
Sandwich type metal shutters thickness 1.2 mm
Shelves and Drawers load carrying capacity 40 Kgs
Overall load carrying capacity of Cabinet 80 Kg (40 Kgs. On each shelf and 40 Kgs. On bottom)
Rear panel material GI steel sheets epoxy powder coated
Rear panel material thickness 1.2 mm
Vertical construction (for reagent racks Aluminum vertical sections extruded from Aluminum alloy T 6063 grade/GI construcyions
Verticals provided with Knock down assembly of service panel and adjustable shelves
Each Verticals with Nylon levellers bolts (for levelling) N.A
All Verticals with top caps in plastic N.A
Reagent shelves bracket made up of N.A
Glass for framed sliding and swinging doors 4 mm thick float glass
Glass for reagent shelf’s 6 mm thick wire glass
Drawers and Doors pulls Made up of aluminium presser die cast (PDC) handles
Minimum length of handle 330 mm epoxy powder coated
Hinges Made up of SS 304 5 digit knuckle butt hinges (at least 95 degree opening) compliant to SEFA 8M standard
Minimum thickness of hinges raw material 2 mm
Number of hinges for shutters / doors under 36 inches in height Hung on 2 numbers of hinges
Number of hinges for shutters / doors over 36 inches in height N.A
Locks N.A
“O” ring over the lock barrel N.A
Shelf supports Power coated shelf support clips
Drawer slides Heavy duty type telescopic ball bearing slides and CED coated in black colour
Legs made up of 2.5 mm thick EDD quality GI steel square having 2.5 mm wall thickness
Leg size N.A
Service pipe supports L type supports duly perforated
Service pipe supports made up of 32 mm x 2 mm thick GI flats slotted at a particular pitch epoxy coated
Work tops Acid resistant granite 18 mm thick
Colour of work top Jet black
Granites edges N.A
Worktop placed on 4 mm thick neoprene rubber stop back (placed in between table tops and table frames work
Electrical points Provided with one number of 3 Module Plate having 5/15Amps combined switch and 1 set of sockets
Modular type reagent rack N.A
DIMENSION
Size of side benches/Island benches (LxWxH) 900 mm X 1500 mm X 900 mm
C Type Fixed Under Bench Cabinet size 500 mm x 500 mm x 540 mm (having one door, one drawer and one adjustable/removable shelf)
C Type Sliding Under Bench Cabinet size N.A
Electrical raceway size 150 mm(H) x 150 mm(W) x 1800 mm
Electrical service panels slideable size 200 mm (H) x 150 mm(W) x 900 mm
Size of Verticals N.A
SIDE SINK ACCESSORIES
Sink made up of N.A
Sink Size 560 mm(L) x 460 mm(W) x 250 mm(D)
Number of Sink 1 number
Water fitting N.A
Splash guard N.A
Peg board One number of size 600 mm(L) x 600 mm(W)
Eye Wash fountain (table mounted) One number (2-way)
Storage unit One set Dummy storage unit with two doors
BLOWER
Exhaust system N.A
Fan made up of N.A
Condensate drain tube Fitted on the lower most point of the casing
Air suction Capacity N.A
Fan mounted on N.A
Motor N.A
Motor speed N.A
Casing made up of One piece PP
Impeller (forward curved centrifugal type) made up of N.A
DUCTING
Ducting made up of N.A
Size of ducting N.A
LAB STEEL STOOL
Stool with backrest No
Revolving type stool No
Provision of adjustable height N.A
At bottom of legs of stool N.A
Seat made up of Cushioned
Backrest made up of Cushioned
Provision of prongs legs N.A
Colour shade of the table N.A
STEEL PAINT FINISH AND PERFORMANCES
Furniture finish ( C frame, GI steel sheet and Aluminum alloy structure) except table top Epoxy powder coated
Making and drilling holes in table top for accommodating the electrical gas Yes
Dry Film thickness (test by Elecometer or DFT meter as per ASTM-D 1186-93, IS 13871 : 1993, IS 101) 35 micron (minimum)
Gloss at 600 reflection (test by Gloss meter as per ASTM-D 523-89 RA 1994 ISO 2813, DIN-67530, IS 13871:1993, IS 101) 70 ± 5 units
Scratch hardness [test by Scratch hardness tester as per BS-3900PART E2 1970 , IS 101 (part-5/SEC-2) 1988, IS 13871 : 1993] 3 Kgs
Impact resistance (Test by Impact tester as per ASTM-D2794-93, BS-3900 Part E3 1979, IS 101, JIS K 5400 – 1979, IS 13871 : 1993) 275 Kg.cm
Cross cut adhesion (Test method : DIN 53151 , ISO 2409 , ASTM D 3002 ASTM D 3359 JIS K 5400-1979, IS 13871 : 1993) 1x1 mm
Flexibility (test by Cylinderical mandrel bending tester as per DIN-53152, ISO 1519 ASTM D 522 BS 3900 Part E1, IS 101 Part-5 SEC-2 1988) 3.25 mm
Erichsen Cupping (Test by Erichsen Cupping tester as per JIS K-5400-1990, IS 101 (part5 Sec2) 1988, IS 13871 : 1993 8 mm
Salt Spray (Test by Salt Spray chamber as per IS 101 (part 6 Sec 1) 1988, ASTM B117-95, IS 13871:1993 1000 hours
TEST REPORT
Availability of Test certificate of the furniture system as per SEFA 8M duly certified by SEFA approved laboratory to prove conformity of products to the specification No
Test Report Number - Must declare, if test report available -
Name of the Lab - must declare, if test report available -

 Sold Out 
  • 0 Units in Stock


This product was added to our catalog on Wednesday 14 October, 2020.

Your IP Address is: 3.89.87.12
You are Visitor
Counting Since 5 August 2011
Flag Counter