SPECIFICATION
| Purpose | ICU Bed are required to be used in Intensive Care Unit for comfort of Patient & facilitate comfortable transfer to & from Emergency/ OT/ Ward etc. & also to carry out point of care process including Radio-logical procedure at bed side |
| Type of ICU Bed Actuator | Mechanical (Handle Operated) |
| Type of mechanism for functioning or controlling angular motion of bed part | Hydraulic mechanism (Manual) |
| Type of mechanism for functioning or controlling Height of bed | Hydraulic mechanism |
| Number of section provided in Bed Top | 4 |
| Base frame and support frame should be fabricated using metallic square / rectangular section of adequate cross section and thickness to provide high structural strength and stability | Yes |
| Bed top perforated | Yes |
| Bed should have radio translucent top (X-Ray translucent) | No |
| Availabilty side panel/Side safety guard | Yes |
| Type of side panel | Swing Up Down type |
| Number of Side panel | 4 |
| Availability Head & Foot panel/Board | Yes |
| Shape of Head & Foot panel /Board | B-type shape |
| Type of Head & foot Panel | Detachable type |
| Material of head and foot panel | ABS (acrylonitrile-butadiene styrene) |
| Availability of good grip for head/foot or side panel | Yes |
| Slots for IV rod at four corners provided | Yes |
| Number of hooks provided in IV rod | 2 |
| Availability of rectangular telesccopic tube box housing for tension spring | Yes |
| Degree Angle & Height indicator shall be provided at both foot & head side | Yes |
| X-Ray film holder used from | Both side |
| Type of X-Ray Film holder | Cassettle Based System |
| Power of motor in HP(for non motorized put NA) | N/A |
| Better quality bearing should be used | Yes |
| Avaiability of patient constraint belt provided on both side of bed | No |
| Availability of Noiseless, non rusting swivel castor wheel/ roller with for easy Mobility & Steering | yes |
| Facility of braking and locking mechanism provided in castor roller | Yes |
| Number of caster to which braking system provided | 2 |
| Availiability Corner buffer in all four corner to protect patient from collision shock | Yes |
| Safe working load capacity of ICU bed in kg | 200 |
| Facility of instant non powered/mechanical CPR( Cardiopulmonary Resuscitation) release at the head end for emergency | Yes |
| Lilen Holder/Urine Bag holder provided | Yes |
| Accessory Rail Provided at all four side of bed | Yes |
| Mattress provided with ICU bed | No |
| ICU mattress must X-ray translucent | NA (If mattress is not provided) |
| Mattress foam of the Bed should be with Anti Microbial agent incorporated into all components that assists in Prohibiting growth of bacteria & fungi and easy to clean | NA (If mattress is not provided) |
| Mattress shall be made of High resilient & bio-density foam | NA (If mattress is not provided) |
| Mattress should be translucent to allow radiography using portable X-ray machines | NA (If mattress is not provided) |
| Mattress should be made in cube cut design & independent cubes promote air flow to reduce moisture | NA (If mattress is not provided) |
| Material for ICU Bed Mattress | NA (if mattress not provided) |
| Maximum thickness of Mattress in mm with tolerance of ± 2 mm | NA (if mattress not provided) |
| Approx foam Density for Head/sacrum in kg/m3 tolerance | NA (if mattress not provided) |
| Approx foam Density for Heel in kg/m3 | NA (if mattress not provided) |
| Therapeutic Weight limit for mattress in kg | NA (if mattress not provided) |
| Operating temperature & humidity for ICU bed | 10 -40 Deg C and relative humidity of 15-90% |
| Power Supply ( as appropriate fitted with Indian plug) | N/A for mechanical operated |
| Facility of Resettable overcurrent breaker shall be fitted for protection | N/A for handle operated |
| ICU Bed frame and top must be Rust Proof | Yes |
| Type of powder/Paint coating done to ICU Bed frame,top & side panel | Epoxy Polyester Coating 50-60 microns |
| ICU Bed should be made up of high quality metal, pretreated with materials providing good finish, scratch resistant, bacteriostatic coating | Yes |
| Process used for pre chemically treatment of metallic bed component | Dip tank processes |
| Facility of easily cleaning /maintenance to ICU Bed | Yes |
| Warranty (Option of comprehensive warranty is available through bidding only, which if opted will supersede normal warranty in the catalogue) | 3 |
| Product instruction manual shall be supplied | Yes |
| Standard Tool Kit for maintananace and Trouble Shooting to be provided with ICU bed | Yes |
| Demonstration of working to be provided after completing supplies before Acceptance | Yes |